Return To Accessories

Speedmatic Adjustable Throttle Control is designed to reduce gas engine speed when pump is bypass and immediately return to full operating RPM when pump operation resumes. Easy to install and simple to adjust, the Speedmatic saves wear on both the pump and the gasoline engine during interruptions in the cleaning process.

Specifications:
Maximum Pressure: 3000 PSI
Minimum Pressure: 725 PSI
Port Sizes Inlet: 3/8 - 19 BSPP - M
Dimensions: 2.72 x 2.12 x 1.44 in. With 42 in. cable

Return To Accessories

The General Pump flow switch is designed to operate in response to a low volume, low pressure flow and still allow for a high pump output flow. The system will provide reliable switching with as little as .75 GPM flow and 18 PSI from the city water supply and will also allow pump output flow up to 18.7 GPM @ 4000 PSI with negligible pressure drop through the valve. General Pump flow switches provide durable, reliable on/off switching for systems that require start/stop capability.
SPECIFICATIONS:
Max. Volume / Pressure* .... 18.7 GPM / 4000 PSI
Min. Volume / Pressure .... .75 GPM / 18 PSI
Contact Ratings .... @ 24Volts AC; 75 Watts; 3A. @ 120Volts AC; 100 Watts; 0.8A
Maximum Temp: .... 165º F
* Minimum burst pressure is 4X working pressure
Part Number: (with pilot feature 100329) or (Without Pilot Feature 103011)

Return To Accessories
Jetter Valve For TT, EZ, and 47 Series Pumps

• Allows standard triplex pump to generate flow pulsations on demand to improve nozzle movement and cleaning power in sewer cleaning applications.

• Simple operation allows both full-flow and pulsation modes.

• Large, easy-to-grasp handle allows gloved operation.

• Easy installation-simply replace middle inlet valve cap and valve on any TT, EZ or 47 Deries pump.

• Maximum pressure 5,000 PSI